Showing posts with label Rolling and Tipping. Show all posts
Showing posts with label Rolling and Tipping. Show all posts

Tuesday, March 12, 2013

Progress

It has been quite a while since we've blogged, so here's the scoop: After sanding out the rain damage and getting a finish coat of paint on the hull, this is what Troubadour looked like:


Next we got busy painting the Flag Blue boot stripe and priming the areas below the waterline where the bottom paint had worn through. We thought some more primer in spots wouldn't hurt, especially after grinding the rusty bottom of the keel, which was neglected until our "night in the slings" 12 hours before splash the last time we were in the yard in 2008. Hopefully by waiting the recommended amount of  time between coats (18 hours for the bottom paint!) the primer and paint will do a little better this time. We'll see!


While we were adding bottom paint, the solar panels arrived and were mounted on top of the new arch.


And after waiting for quite a while for a quiet day to apply the graphics, we finally got a quiet morning to both apply the cool new guitar graphic and reapply the name so Troubadour was no longer anonymous. The struggle to disconnect and pull the shaft (in order to replace the cutless bearing) was ultimately successful (yea!), so after the new bearing went in and the shaft was reinserted, the new rudder could be uncrated, hung and painted. Linda finished sewing the new enclosure top about the same time, and it was laced onto the frame.


We are in the process of reconnecting everything that was disconnected, restowing things that haven't been stowed for months, trying to find new homes for things that have been displaced during remodeling, and yes, disposing of things for which we haven't found a home, or have yet to find useful.

After completing the new settee cushions and enclosure top, we (Linda) still have front (dodger) and side enclosure panels to sew, two sets: one of Regalite vinyl windows and another of Phifertex mesh screens. We (Chris) keep tackling the project list while Linda sews. We (both) feel a big sense of relief having come this far and expect to be back in the water by the end of the month, if not sooner. Looking forward to floating again soon!

Monday, January 21, 2013

Sanding and Sewing

Since this is our first blog post of the year, a “Happy New Year” shout out to everyone, even if it is a few weeks late! We completed priming the hull as described in the last post. As the even color of the primer slowly became the norm, it was easier to see that the surface of the filler over the patches where I removed thru-hulls just wasn’t even, “fair” in nautical terms. Despite sanding and filling numerous times, the different colors tended to mask the unevenness. After coming this far, I wasn’t willing to settle so I went back at them, sanding through the meticulously applied primer to sand down the high spots, and adding a bit more filler in the low places, sighting down the hull in several different directions each time, before re-applying several coats of primer to bring everything back to even.

We managed to get the first finish (shiny) coat on just before the New Year, and marveled how the books are right: those reflections really make it easy to see every imperfection in sanding, fairing, or painting! We realize that as a first time DIY job it’s not going to be perfect, so we concentrated on refining our technique with each coat and are improving our painting technique, as well as learning to ignore the small spots we missed filling, or the small humps where filler wasn’t sanded down perfectly. The goal is to get to a “10 footer”, a job that looks shiny and great from 10 feet away.
After sanding out our worst mistakes and giving the boat an overall sanding, we were ready to apply our “final” coat this weekend. Saturday was rainy, a non-starter. Sunday was dry and cooler than usual, perfect for the paint to flow out smoothly. We got the port side painted in the morning shade, and returned in the afternoon to complete the job. About an hour into our “final” pass down the starboard side, a 10 minute rainshower passed over and decimated our work. It looks like we have another few days of sanding out the texture, washing, wiping, and painting in our future. Oh well, another chance to perfect our technique!




Water beading up is fine after you're done painting, not so nice while you're painting!

While we were sanding and painting, the guys at TechNick finished welding the new davit/arch, and installed it along with the new cockpit enclosure frame. I’ve managed to fish most of the wires through the arch legs and have reinstalled the stern light, radar, TV, VHF, and GPS antennas, and still need to complete the WiFi and Sirius antenna installs. We still have some minor additions/changes, so the welders will be back to run the “punch list”.


While wiring the new arch, I took the time to route some of the cables at the helm through the pedestal leg, and install a proper watertight seal for the radar cable, removing the putty and filling the old hole with epoxy. Typical boatyard job creep!

With the new enclosure in place, Linda was able to finalize measurements and order Sunbrella, screen, and window material for the new enclosure, including the snap hardware and zippers we’ll use to assemble everything. The fabric, batting and pillows for the new settee arrived so she has been busy covering the settee cushion foams she had cut by Nabela, nearby here in the industrial park. I’m sure each of these projects will get their own posts in the future. For now, back to sanding!

Thursday, December 13, 2012

Little by little

"You've got soul!"  Greg from S/V Sonrisa said to us when he learned our intention to repaint Troubadour's 51-foot hull. On days when we've put in eight or nine physical hours and the last coat of primer is going on after sunset, those encouraging words really lift our spirits.


Upon our return to the yard,
Chris completes sanding down the boot stripe
I guess not many boat owners would take the time to prime and roll and tip their own hulls. It's easier to spray the hull, or to hire someone else to do the work. We've seen boats in the yard completed in a matter of days that way. We've got more time than money, so we opted to do this work ourselves. And work it is! Don't kid yourself if you want to take on this project.


Starboard side prior to priming
Am I whining? No way. Just being real. Yeah we're "living the dream" but the dream doesn't come without trade-offs. Would I rather be at anchor in a secluded bay surrounded by crystal clear blue water, or sailing in a beautiful Caribbean breeze? You bet. I would also rather be enjoying some of the island activities that other cruisers enjoy. But, for now, we are working. And yes, we would rather be working on our boat, in a dusty, noisy boat yard, in the 86 degree heat with the sun beating on our backs, than sitting in a Kaizen meeting in our former jobs at GE Healthcare in Pewaukee, Wisconsin. Yes! Yes! Yes! 



Troubadour after two coats of primer
There are actually several projects going on simultaneously: priming and everything else.


The actual physical act of priming the whole boat starboard, port and stern takes about two hours. The preparation takes more time. Our complete priming begins with a close up examination of the hull for any nicks or pin holes or scratches that the previous coat of primer did not cover. I mark all these imperfections with blue tape.


How many coats of primer to cover this repair?
She looks like she could use some Clearasil®


Close up of "blemish" covered with glazing compound
Chris follows behind me with glazing compound and fills them. This takes about an hour. When the glazing has dried, Chris sands the whole boat with 240 grit sandpaper using a random orbital sander and feels for any imperfections with his hands. This will take 2 - 3 hours. Next comes washing the hull with a mix of laundry soap and TSP. Chris wipes with the rasta rag and I hose the boat down. Usually the next day, we prime. We begin the priming at 3 pm when the sun has moved to the port side of the boat, leaving the starboard side in the shade, and by the time the sun goes behind the hills, the port side is in the shade. I wipe down the boat with a solvent called 2333N to remove any soap or dust or sanding residue, this takes about an hour. While I am doing that, Chris prepares and mixes the primer and prepares the rollers/brushes. Chris rolls primer on the hull, while I prime around small taped off areas like vent covers and through-hulls (holes in the sides of the boat). And finally, we clean up, and most importantly, stop at the Dug Out for a few beers.

The following day, we inspect the priming job, using the bright sun as our guide. And after a review of the weather forecast, the whole process repeats. After two coats of primer, and seeing that some of the color of the fiberglass repair was noticeable through the primer, we opted to put on a third coat. After the third coat, we felt a fourth coat was necessary. Our fourth coat of primer goes on this week.

At least he is smiling!
In between the priming project, Chris is sanding, priming and painting our swim step; and working with Nick at Technick on the redesign of our davits/bimini/dodger frames. I have been taking measurements to make cushions for our new settee area. We have not tried to fit our rudder yet, as we want to paint the bottom prior to installation and the area around the rudder gets a lot of fouling. In addition, the propeller shaft needs to be pulled so that the cutlass bearing can be replaced. We plan to install the rudder after that project, as well.

With all of this work going on our social life is lacking. So tonight we are looking forward to happy hour with Scott from S/V Asante and George from S/V Earthling at Port Louis. Friday we will be going to our first Christmas Party of the season at D Island Roots Dug Out Bar. Cheers!
Fairwinds


Related Posts Plugin for WordPress, Blogger...
Sailing Blogs